Gensets

Ats Panel

An ATS panel brief should state how the mains supply fails, where the changeover sits, and which loads must carry through the interruption. On South African industrial sites, that usually means noting the breaker arrangement, control voltage, and whether the existing panel has spare room for added wiring.

Changeover events under load shedding

The ATS Panel page is for sites that need the generator to transfer cleanly when mains power drops. For South African plants dealing with load shedding, the panel choice affects changeover, control layout, and how the existing setup is tied in.

Use this ATS Panel path when the job is already defined and the next step is checking the current arrangement. Include the site constraint, the operating window, and a photo of the present panel or changeover point so the brief matches the plant.

Panel records worth keeping

You get a workable ATS panel route, a practical checklist, and an email trail that identifies the correct setup. Your plant load, the ATS panel already fitted and the hours you run through an outage decide the genset size.

Do not skip the first walk-through photo of the ATS panel. You will want a second check on cable entries, labelling and changeover layout before the courier leaves.

Site conditions that alter panel work

Plan around OR Tambo export weeks, Sunnyrock warehouse cut-offs and showroom hours at second-tier malls. On coastal sites, salt and grit mean more frequent cleaning; inland dust means checking intake guards, terminals and sensors more often.

Keep urgent ATS panel work separate from the routine weekly planning list. A showroom booking is for viewing the ATS panel setup, not for a general sales meeting. Operated by Astros Marketing (Pty) Ltd from our Germiston office.

Keep exploring

Gensets · Runtime · About · Contact form.

Questions about ATS Panel? For ATS Panel enquiries, use the contact form and include your city, preferred timing, and the supply rating at the board. The Germiston team reviews these during standard business hours.

Germiston ATS panel requests

Keep the ATS panel brief tied to the actual switch point on site. A note on restricted access, hygiene zones, confined plant rooms, or an ageing distribution board helps match the panel arrangement to the plant. Include what trips first, what must stay live, and whether the generator is manual start or auto start.

Changeover events under load shedding

Ats Panel is written for teams that already understand the generator duty and need the next practical step. It covers the panel side of the job clearly, including what to note on site before any changeover or integration work is discussed.

Start with the incoming supply details, the generator set size, and the loads that cannot drop during transfer. In Johannesburg and other inland areas, dust works into panel vents and terminals, while Durban and coastal sites need closer attention to corrosion on glands, lugs, and door hardware. Delivery access and switch room space also affect panel selection and cable routing.

Take the first photo with the panel door open and the labels readable. A second image of the cable entry side often shows gland space, trunking congestion, and whether the present changeover can be retained. Those two views prevent confusion around metering, control wiring, and lockable isolation points.

Panel records worth keeping

The ATS panel trail should leave the plant with the switching arrangement stated plainly, the checks listed, and the current setup recorded by photo. One defined panel route is easier to install and test than a stack of vague options with no confirmed tie in point.

Match Ats Panel with Runtime before extra scope is added. Ask for a second look at cable entries, labels, and the changeover layout before anything is collected or sent.

  • Mains and generator incomer ratings
  • Clear photo of labels and entries
  • Email trail with panel references

Site conditions that alter panel work

Plan around OR Tambo export weeks, Sunnyrock warehouse cut offs, and showroom hours at second-tier malls when panel parts or collections are involved. Older factories around Gauteng often have mixed generations of switchgear, so the ATS panel brief should mention any non standard breakers, worn escutcheons, or handwritten circuit tags. Where a live genset is in place, note that separately from any breakdown report.

Salt and grit on coastal sites call for more frequent cleaning inside enclosures and closer inspection of hinges, seals, and terminations. Inland dust means checking intake guards, relay compartments, and sensor connections more often, especially where the panel room is not sealed. During load shedding periods, transfer tests should be logged against the actual operating window used by the plant.

Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.

ATS panel fault and layout notes

Send ATS panel notes with site photos, your city, and the time window available for switching checks. Add what failed, what stayed live, and whether the issue sits in the generator controller, the changeover section, or the mains side.

Filing the ATS panel record that day makes the supporting paperwork easier to track later. Pair this sheet with the service note and runtime log when the buyer asks for supporting documents.

What our Industrial Generator customers say

Verified Google reviews