Support
Escalation
A clear escalation route for South African generator sites.
How Escalation fits into a normal week
The Escalation page is for generator faults that have moved past ordinary support and need the history set out clearly. Use it when repeated trips, unresolved alarms, load issues or handover gaps mean the site needs a firmer technical path.
Escalation starts with the fault history, not the catalogue size. Note the generator rating, the transfer method, the affected load and any site restriction such as basement exhaust, narrow yard access or shared tenant supply. Conditions differ between Gauteng dust, Durban salt air and Cape Town winter moisture, so those details must sit next to the alarm record.
Include a proper photo sequence before the case is handed upward. Clear images of the controller, breaker position, ATS, fuel level and any warning lamps give the next technician a usable starting point. On South African sites with shift changes and contractor handovers, that record prevents the same basic checks being repeated three times.
Escalation pack for live faults
Build one technical record that can follow a stubborn fault. It should show what tripped, what held load, what was reset and which parts were touched during previous visits. A concise history helps when the problem only appears during evening changeover, municipal dips or extended outages.
Link the escalation note to the matching Runtime entry and any Load notes before extra work is authorised. Add the ATS panel reference, controller alarm text and the last service date through the contact form so the case is tied to the right machine. If a unit is being moved off site, record serial number, canopy condition and whether the breaker was left isolated.
- Trip history matched to exact load event
- Controller alarms captured before any reset
- ATS position and breaker state noted
Fault patterns seen on SA sites
Escalated cases often come from plants running through load shedding blocks, municipal voltage swings and weekend skeleton staffing. Warehouses near OR Tambo may also need movement notes for hired units, access times for collection vehicles and after-hours security sign-in details. On multi-tenant properties, identify which board, feeder or DB was actually on generator support when the fault occurred.
Sea air around Durban and the Cape can leave terminals, changeover gear and radiator fins in rough condition. Inland mines, mills and factories see the opposite problem, with dust loading filters and cooling packs faster than the normal interval suggests. Those site conditions matter in escalation because repeated overheating, low charge alarms and nuisance trips rarely come from one cause alone.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
What to send with the case
Attach the timing of each incident, the site location, the controller model and the exact wording of any active alarm. Add what was done on site, including manual starts, breaker resets, fuel drains, battery swaps or bypass use. A short list of failed checks is more useful than a long retelling of the whole outage.
Keep the ATS record, service note and runtime log under the same reference when the matter moves beyond routine support. That makes it easier for maintenance staff, buyers and facility managers to trace whether the issue sits with switching, engine protection, fuel quality or load step behaviour. Where more than one generator serves the property, mark clearly which set carried the event and which remained on standby.
